Reference Guide

Table 190. --Hdd1FanEnable (continued)
Attribute Details Description
Enables or disables the error checking on the FAN_HDD1 fan controller.
--Hdd2FanEnable
Table 191. --Hdd2FanEnable
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables the error checking on the FAN_HDD2 fan controller.
--Hdd3FanEnable
Table 192. --Hdd3FanEnable
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables error checking on the FAN_HDD3 fan controller.
NOTE: If the fan controller detects a fan, it automatically enables it.
--HddAcousticMode
Table 193. --HddAcousticMode
Attribute Details Description
Valid Argument Bypass, Quiet, Suggested, Performance
Sets the hard disk acoustic mode. If set to Bypass, BIOS does not modify the currently set
acoustic mode of the hard disks. Quiet sets the acoustic mode of the hard disks to the
quietest operation. Suggested sets the acoustic mode of the hard disks to the setting
suggested by the manufacturer. Performance sets the acoustic mode of the hard disks for
the highest disk performance.
--HddFailOver
Table 194. --HddFailOver
Attribute Details Description
Valid Argument Enabled, Disabled
Specifies the devices in the hard disk drive sequence menu that are attempted in the boot
sequence. If set to off, only the first device is attempted in the boot sequence. If set to on, all
devices are attempted as listed in the hard disk drive sequence.
--HddInfo
Table 195. --HddInfo
Attribute Details Description
Valid Argument Read-only
66 Options for Dell Command | Configure 4.x