Reference Guide

Table 176. --FnLockMode (continued)
Attribute Details Description
Controls the behavior of the dual-function keys (<F1> — <F12>), when <Fn> key is pressed
and when it is not.
● Enabled—Press the function keys to use the primary function of the key.
● Disabled—Press the function keys to use the secondary function of the key.
--ForcePxe
Table 177. --ForcePxe
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables Preboot Execution Environment (PXE) as the first boot device on all
subsequent boots.
--ForcePxeOnNextBoot
Table 178. --ForcePxeOnNextBoot
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables Force PXE on next boot in BIOS.
If enabled, when the BIOS boots next time, the first PXE-capable device is inserted as the first
device in the boot sequence. Enabling this value causes this operation on the next boot only,
and does not cause a change in the defined boot sequence of the system. The BIOS chooses
the first PXE-capable device as the onboard network controller of the system, if present and
enabled, or the first bootable network device found in the standard PCI search order of the
system, whichever comes first.
If disabled, the boot override feature is disabled and the system boot sequence is in effect.
--FrontPanelErrDisplayMode
Table 179. --FrontPanelErrDisplayMode
Attribute Details Description
Valid Argument AllErr, FirstErr
Configures to report all the errors or only the first error on the front panel Liquid Crystal
Display (LCD).
● AllErr—All errors displayed on front panel LCD.
● FirstErr—Only first error displayed on front panel LCD.
--FrontBezelLEDIntensity
Table 180. --FrontBezelLEDIntensity
Attribute Details Description
Valid Argument Disabled, Low, Medium, and Full
Controls the light intensity of the LED which is there in the front bezel.
Options for Dell Command | Configure 4.x 63