Reference Guide

--FanSpdAutoLvlonUpperPcieZone
Table 167. --FanSpdAutoLvlonUpperPcieZone
Attribute Details Description
Valid Argument 0 to 100
When the Thermal Mode is set to Auto, Fan Speed Control Auto Level determines the minimum
speed of the fans. Zero is the optimal speed level. Higher level improves the cooling factor.
--FanSpeedLvl
Table 168. --FanSpeedLvl
Attribute Details Description
Valid Argument Integers ranging from 0 to 100
Configures the fan speed control if the fan speed is set to Auto using fanspeed attribute. 0
sets the fanspeed to the optimal speed level, and higher percentage provides enhanced
cooling.
--Fastboot
Table 169. --Fastboot
Attribute Details Description
Valid Argument Thorough, Minimal, Auto
Enables fast booting.
● Thorough—Sets POST to perform complete hardware and configuration testing.
● Minimal—Sets POST to perform minimal hardware testing.
● Auto—Allows the BIOS to decide what level of POST test is used.
--FirstPowerOnDate
Table 170. --FirstPowerOnDate
Attribute Details Description
Valid Argument Read-only
Displays the date on which the system was first turned on.
--FingerprintReader
Table 171. --FingerprintReader
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables the Fingerprint reader device.
● Enabled—Fingerprint reader device is enabled.
● Disabled—Fingerprint reader device is disabled.
Options for Dell Command | Configure 4.x 61