Reference Guide

Table Of Contents
--Decrypt
Table 111. --Decrypt
Attribute Details Description
Valid Argument Read-only
Allow to Decrypt.
--DeepSleepCtrl
Table 112. --DeepSleepCtrl
Attribute Details Description
Valid Argument S5Only, S4AndS5, Disabled
Configures the system power mode when the system is in s4 and s5 state. If set to S5Only,
the system moves to the lowest-power off mode when in s5 state. If set to S4AndS5 state,
the system moves to the lowest-power off mode when in s4 and s5 states. When the system is
in a low-power mode, it turns off most of the power-consuming circuitry devices, to meet the 1
W power limit. It disables the Power Management Event (PME), USB power, and so on.
--DeviceHotkeyAccess
Table 113. --DeviceHotkeyAccess
Attribute Details Description
Valid Argument
Enabled, Disabled, and OnetimeEnable
DeviceHotkeyAccess manages whether you can access device configuration screen through
hotkeys during system reboot. This setting prevents the access to Intel® RAID (CTRL+I), LSI
RAID (CTRL+C), or Intel Management Engine BIOS Extension (CTRL+P/F12).
EnabledEnabling device configuration hotkey allows you to access the device configuration
screen by pressing the hotkeys during the system reboot.
One time enableYou can access the device configuration screen by using hotkeys after a
successful reboot. On the next system reboot, the setting reverts back to a disabled state.
DisabledYou cannot access the device configuration screen using hotkeys.
--DisGpuExtDisplay
Table 114. --DisGpuExtDisplay
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables the platform external displays.
NOTE: Embedded Display Port (eDP) will be enabled by Integrated Graphics Processing Unit
(iGPU).
EnabledAllows discrete Graphics Processing Unit (dGPU) to enable the platform external
displays such as HDMI, NB DP, Type-C, and so on with the purpose of enabling discrete graphic
features such as Eyefinity, Mosaic, 10bit DP displays, etc..
DisabledThe normal hybrid graphics mode is enabled.
NOTE: This feature is used in hybrid graphics mode only.
50 Options for Dell Command | Configure 4.x