Reference Guide

Table 94. --ChassisIntruStatus (continued)
Attribute Details Description
Displays the status of chassis intrusion. All the values are read-only except tripreset.
● DoorOpen—Indicates chassis door is opened.
● Tripped—Indicates the chassis door is opened since the last time the sensor detection
logic was reset.
● DoorClosed—Indicates chassis door is closed.
● TripReset—Resets the sensor detection logic to detect the next closed-to-open transition
on the chassis door.
--ClearDellRmtLog
Table 95. --ClearDellRmtLog
Attribute Details Description
Valid Argument Enabled, Disabled
--CmosDefaults
Table 96. --CmosDefaults
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables the request for a default of CMOS values when the system reboots.
--CompletionCode
Table 97. --CompletionCode
Attribute Details Description
Valid Argument Read-only
Displays the completion code of an update operation performed by BIOS in the recent
shutdown or reboot operation. For more information, see Completion Code.
--Computrace
Table 98. --Computrace
Attribute Details Description
Valid Argument Activate, Disabled
This feature allows the user to enable or disable Absolute Software's Computrace security
software BIOS ROM. After this token is written, the state is permanently maintained (this is a
write-once field).
NOTE:
You cannot enable or disable this feature using Dell Command | Configure.
46 Options for Dell Command | Configure 4.x