Reference Guide

--BootSpeed
Table 84. --BootSpeed
Attribute Details Description
Valid Argument Default, Compatible
Sets microprocessor speed to default or compatible. If set to compatible, the Central
Processing Unit (CPU) speed will be significantly slower. This is implementation dependent.
There is no specific speed for compatible, except that it is significantly slower than default.
--BootTimeVideo
Table 85. --BootTimeVideo
Attribute Details Description
Valid Argument Onboard, Addin
Sets the onboard or first add-in video controller for boot time messages.
● Onboard—The onboard video controller is used for boot-time messages.
● Addin—The first add-in video controller is used for boot-time messages.
NOTE: Depending on the BIOS search and system slot layout, the first add-in device
changes.
--BroadcomTruManage
Table 86. --BroadcomTruManage
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables the BroadcomTruManage technology.
--BrightnessAc
Table 87. --BrightnessAc
Attribute Details Description
Valid Argument
Integers ranging from 0 to 15
Sets the panel brightness to be used when the system is using AC power. 0 sets the panel
brightness to 0%, and 15 sets the panel brightness to 100%.
--BrightnessBattery
Table 88. --BrightnessBattery
Attribute Details Description
Valid Argument Integers ranging from 0 to 15
Sets the panel brightness to be used when the system is using battery power only. 0 means
panel brightness will be 0%, and 15 means panel brightness will be 100%.
44 Options for Dell Command | Configure 4.x