Reference Guide

--AntennaSwitch
Table 42. --AntennaSwitch
Attribute Details Description
Valid Argument AllInternal, WlanWwanExt, WlanGpsExt, WwanGpsExt, WlanExt, WwanExt, and GpsExt
This setting determines the antenna usage when the system is connected to a docking station.
The option designates which wireless radio is connected to which dock antenna. The System
Antennas Only option indicates the system antennas that are used, and the dock antennas that
are not used, even when the system is docked.
When the system is undocked, the system antennas are used and this setting has no effect.
Ant A indicates dock antenna A, and Ant B indicates dock antenna B.
NOTE: This setting applies to rugged docking stations and does not apply to USB Type-C
docking stations.
--AsfMode
Table 43. --AsfMode
Attribute Details Description
Valid Argument On, Off, AlertOnly, Dash
Sets the alert standard format.
● On—Turns the ASF mode on.
● Off—Turns the ASF mode off.
● AlertOnly—Enables only error messages.
● Dash—Enables LOM to have both DASH and ASF 2.0 functionality.
--Aspm
Table 44. --Aspm
Attribute Details Description
Valid Argument Auto, Disabled, L1
Set the Active State Power Management (ASPM) level.
● Auto—There is handshaking between the device and PCI Express hub to determine the
best ASPM mode supported by the device.
● Disabled—ASPM power management is turned off always.
● L1—ASPM power management is set to use L1.
--Asset
Table 45. --Asset
Attribute Details Description
Valid Argument <string>
Displays or sets the customer-programmable asset tag number for a system. The maximum
length of an asset tag is 10 characters. Asset tag values should not contain any spaces.
32 Options for Dell Command | Configure 4.x