Reference Guide

Table 19. --AdiModeChannel3 (continued)
Attribute Details Description
Sets the defined Analog/Digital Interface mode for channel 3.
● Unused—Channel is unused.
● AdcInput—Sets the channel mode as Analog-to-Digital Converter (ADC) input.
● DacOutput—Sets the channel mode as Digital-to-Analog Converter (DAC) output.
● DacAndAdc—Sets the channel mode as DAC output, but can be monitored through ADC
input.
● Gpio—Sets the channel mode as General Purpose Input or Output.
--AdiModeChannel4
Table 20. --AdiModeChannel4
Attribute Details Description
Valid Argument Unused, AdcInput, DacOutput, DacAndAdc, Gpio
Sets the defined Analog/Digital Interface mode for channel 4.
● Unused—Channel is unused.
● AdcInput—Sets the channel mode as Analog-to-Digital Converter (ADC) input.
● DacOutput—Sets the channel mode as Digital-to-Analog Converter (DAC) output.
● DacAndAdc—Sets the channel mode as DAC output, but can be monitored through ADC
input.
● Gpio—Sets the channel mode as General Purpose Input or Output.
--AdiModeChannel5
Table 21. --AdiModeChannel5
Attribute Details Description
Valid Argument Unused, AdcInput, DacOutput, DacAndAdc, Gpio
Sets the defined Analog/Digital Interface mode for channel 5.
● Unused—Channel is unused.
● AdcInput—Sets the channel mode as Analog-to-Digital Converter (ADC) input.
● DacOutput—Sets the channel mode as Digital-to-Analog Converter (DAC) output.
● DacAndAdc—Sets the channel mode as DAC output, but can be monitored through ADC
input.
● Gpio—Sets the channel mode as General Purpose Input or Output.
--AdiModeChannel6
Table 22. --AdiModeChannel6
Attribute Details Description
Valid Argument Unused, AdcInput, DacOutput, DacAndAdc, Gpio
Sets the defined Analog/Digital Interface mode for channel 6.
● Unused—Channel is unused.
● AdcInput—Sets the channel mode as Analog-to-Digital Converter (ADC) input.
● DacOutput—Sets the channel mode as Digital-to-Analog Converter (DAC) output.
● DacAndAdc—Sets the channel mode as DAC output, but can be monitored through ADC
input.
26 Options for Dell Command | Configure 4.x