Reference Guide

--AddDevice
Table 16. --AddDevice
Attribute Details Description
Valid Argument Usb
Adds the specified device to the boot device list. At present, only the Universal Serial Bus
(USB) storage device is supported. This option is not valid on all the systems. The USB storage
device is added at the end of the boot order. If the USB storage device is already added in the
boot order list, the following message is displayed while executing the option:USB device
is already present in this machine.
NOTE: The AddDevice option is not supported on the systems with UEFI-based BIOS.
Example
C:\>cctk --AddDevice=Usb
--AdiModeChannel1
Table 17. --AdiModeChannel1
Attribute Details Description
Valid Argument Unused, AdcInput, DacOutput, DacAndAdc, Gpio
Sets the defined Analog/Digital Interface mode for channel 1.
● Unused—Channel is unused.
● AdcInput—Sets the channel mode as Analog-to-Digital Converter (ADC) input.
● DacOutput—Sets the channel mode as Digital-to-Analog Converter (DAC) output.
● DacAndAdc—Sets the channel mode as DAC output, but can be monitored through ADC
input.
● Gpio—Sets the channel mode as General Purpose Input or Output.
--AdiModeChannel2
Table 18. --AdiModeChannel2
Attribute Details Description
Valid Argument Unused, AdcInput, DacOutput, DacAndAdc, Gpio
Sets the defined Analog/Digital Interface mode for channel 2.
● Unused—Channel is unused.
● AdcInput—Sets the channel mode as Analog-to-Digital Converter (ADC) input.
● DacOutput—Sets the channel mode as Digital-to-Analog Converter (DAC) output.
● DacAndAdc—Sets the channel mode as DAC output, but can be monitored through ADC
input.
● Gpio—Sets the channel mode as General Purpose Input or Output.
--AdiModeChannel3
Table 19. --AdiModeChannel3
Attribute Details Description
Valid Argument Unused, AdcInput, DacOutput, DacAndAdc, Gpio
Options for Dell Command | Configure 4.x 25