Reference Guide

Table 12. --Absolute (continued)
Attribute Details Description
Sets the value to the Absolute interface and control the Absolute service using the following
options:
● Enabled—If enabled, then the Absolute service is activated or deactivated.
● Disabled—If disabled, then the Absolute service does not run.
● PermanentlyDisabled—If the Absolute interface is permanently disabled, then the
Absolute feature can be enabled by using the factory reset feature.
--AcPwrRcvry
Table 13. --AcPwrRcvry
Attribute Details Description
Valid Argument
off, last, on
Sets the behavior of the system after Alternating Current (AC) power is lost.
● Off—When AC power is restored, the system remains turned off.
● On—When AC power is restored, the system turns on.
● Last—When the AC power is restored, the system returns to the state it was in when the
power was lost.
--ActivityLed
Table 14. --ActivityLed
Attribute Details Description
Valid Argument
ActLed, Wlan, Disabled
Sets the Network Activity Light Emitting Diode (LED) to any of the following:
● ActLed—Sets the Activity LED controlled by an Advanced Configuration and Power
Interface (ACPI) operating system and driver.
● Wlan—Sets the Activity LED as a wireless Local Area Network (LAN) radio on/off
indicator.
● Disabled—Sets the Activity LED to off.
--AdaptiveCStates
Table 15. --AdaptiveCStates
Attribute Details Description
Valid Argument Enabled, Disabled
Adaptive C-States allow the system to dynamically detect high usage of a discrete graphic and
adjust system parameters for higher performance during that time period.
This feature requires an AC adapter due to higher energy consumption, and dynamically it is
not possible to activate higher performance without an appropriate AC adapter. Other settings
that conserve power may block the utilization of this feature.
24 Options for Dell Command | Configure 4.x