Reference Guide

Table 9. -O or --Outfile (continued)
Attribute Details Description
devices that are available in the system. It is recommended that you apply the INI file on a
system with the same active boot list as of the system from where the INI file is generated.
Example
C:\>cctk -o <c:/cctk>/filename.ini
NOTE: For the systems running Ubuntu Core operating system, run dcc.cctk -o /var/
snap/dcc/current/<filename>.ini
--Propowntag
Table 10. --Propowntag
Attribute Details Description
Valid Argument NA
Sets the Dell property ownership tag. If an option is not given, Dell Command | Configure
reports the current property ownership tag.
NOTE: The maximum length of property ownership tag is 80 characters for desktops and
48 characters for laptop.
--Version
Table 11. --Version
Attribute Details Description
Valid Argument Read-only
Displays the version information, current time, and date for the utility. This is a read-only
option.
BIOS options
The following list describes Dell Command | Configure options and arguments along with a description of their expected
behavior. Options and arguments are case sensitive. All options and predefined arguments are lowercase unless stated
otherwise.
NOTE:
Some of the following options or arguments may not be available on all systems due to the BIOS version or
hardware feature set. Entering Dell Command | Configure on a command line without arguments displays only those options
that are valid for your system. For more details about the options, see No option.
NOTE: If you configure a setup password and system password for the system while changing a BIOS value, type the setup
password.
--Absolute
Table 12. --Absolute
Attribute Details Description
Valid Argument Enabled, Disabled, and PermanentlyDisabled
Options for Dell Command | Configure 4.x 23