Reference Guide

Table 463. --UefiBootPathSecurity (continued)
Attribute Details Description
● Always—Booting from any UEFI boot path requires the user to enter the Admin password.
● Never—The Admin password is not required for booting from UEFI boot paths.
--CapsuleFirmwareUpdate
Table 464. --CapsuleFirmwareUpdate
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables BIOS updates through UEFI capsule update packages.
NOTE: Disabling this option blocks the BIOS updates from services such as Windows
Update and Linux Vendor Firmware Service (LVFS).
--UefiNwStack
Table 465. --UefiNwStack
Attribute Details Description
Valid Argument Enabled, Disabled, SelectiveEnable, and AutoEnable
Enables or disables the UEFI network protocols that allow the usage of network card in a
preinstallation environment.
● Enabled—Enables speed boot time, limits network security, and network access capability.
Select the UefiNwStack option to run diagnostics and recovery of the system.
● Disabled—Disables speed boot time, network security, and restricts network access
capability.
● SelectiveEnable—The speed of the boot time reduces, limits network security, and
increases network access capability. Select the UefiNwStack option for BitLocker to work
on boot.
● AutoEnable—This option is not displayed when the UefiNwStack is enabled by platform
customization. Enables speed boot time, limits network security, and increases network
access capability.
Select the UefiNwStack option to enable multiple applications to work on boot (BitLocker
works with limitations).
--UniversalConnect
Table 466. --UniversalConnect
Attribute Details Description
Valid Argument Enabled, Disabled
Allows or denies Windows 95 from re-enumerating when a new dock device is attached to the
system.
● Enabled—Denies Windows 95 from re-enumerating when a new dock device is attached
to the system.
● Disabled—Allows Windows 95 from re-enumerating when a new dock device is attached
to the system.
Options for Dell Command | Configure 4.x 125