Reference Guide

--TurboMode
Table 459. --TurboMode
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables single core-based turbo mode. When enabled, Intel Turbo Boost Technology
allows processor(s) to run at frequencies higher than the advertised frequency.
--TypeCPower
Table 460. --TypeCPower
Attribute Details Description
Valid Argument 7.5W, 15W
Configures the maximum power (in Watts) for type-C connector.
--TypeCDockOverride
Table 461. --TypeCDockOverride
Attribute Details Description
Valid Argument
Enabled, Disabled
This field allows the Type-C Dell dock to initiate a data stream when the external USB ports
are disabled. When the Type-C dock override is enabled, it activates video, audio, or LAN
connection that can be used.
--UartPowerDown
Table 462. --UartPowerDown
Attribute Details Description
Valid Argument Enabled, Disabled
Enables the operating system to power down Universal Asynchronous Receiver/Transmitter
(UART) or disables the operating system from powering down UART.
--UefiBootPathSecurity
Table 463. --UefiBootPathSecurity
Attribute Details Description
Valid Argument AlwaysExceptInternalHddPxe, AlwaysExceptInternalHdd, Always, and Never
Determines whether the system should prompt the user to enter the Admin password, if set,
while booting from a UEFI boot path from the F12 Boot Menu.
● AlwaysExceptInternalHddPxe—UefiBootPathSecurity determines whether tor not the
system must prompt you to enter the Admin password. This occurs when the
UefiBootPathSecurity is set while booting from a UEFI boot path (from the F12 Boot
Menu).
● AlwaysExceptInternalHdd—All UEFI boot paths require the user to enter the Admin
password, except for the boot paths that are hosted on an internal hard disk drives.
124 Options for Dell Command | Configure 4.x