Reference Guide

--Sriov
Table 418. --Sriov
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables BIOS support for Single Root I/O Virtualization (SR-IOV) devices.
--StandbyState
Table 419. --StandbyState
Attribute Details Description
Valid Argument S1, S3
Sets the system to ACPI S1 or S3 sleeping state when the systems enters standby mode.
--StealthMode
Table 420. --StealthMode
Attribute Details Description
Valid Argument Enabled, Disabled
Configures the Dell Stealth Mode features. Sets the operation mode of the system elements. If
enabled, the system operates in the preprogrammed stealth mode. If disabled, the system
operates in the normal mode. For example,
● If stealth mode is enabled and the device is set to TurnOff, then you can press Fn+F7 keys
to turn the device off.
● If the stealth mode is enabled and the device stealth mode is set to Unchanged, then the
device retains its status and remains unchanged while pressing Fn+F7 keys.
● If the stealth mode is disabled, then the state of the device cannot be changed by the
individual device stealth modes.
Following are the system elements that have effect of stealth mode on them:
● DisOnboardLEDs
● DisOnboardLCDScreen
● DisOnboardSpeakers
● DisOnboardFans
● DisBluetoothRadio
● DisGPSReceiver
● DisWLANRadio
● DisWWANRadio
● DisOnboardLEDs
--StrongPassword
Table 421. --StrongPassword
Attribute Details Description
Valid Argument Enabled, Disabled
Enables to enforce a strong password.
Options for Dell Command | Configure 4.x 115