Reference Guide

--PcieLinkSpeed
Table 330. --PcieLinkSpeed
Attribute Details Description
Valid Argument Auto, Gen1, Gen2
Possible Values Configures the PCIe LinkSpeed.
● Auto—PCIe link speed is configured based on the maximum speed that is supported
by both upstream and downstream devices.
● Gen1—The PCIe link speed is configured in gen1.
● Gen2—The maximum PCIe link speed that is allowed is limited to gen2.
--PciMmioSpaceSize
Table 331. --PciMmioSpaceSize
Attribute Details Description
Valid Argument Small, Large, Dynamic
Allocates a part of the memory to the PCI Memory Mapped I/O. It allows you to
reserve large or small device-specific memory regions to decrease or increase the
usable memory on systems with a 32-bit operating system.
● Small—Allocates a small region of memory to PCI memory mapped I/O.
● Large—Allocates a large region of memory to PCI memory mapped I/O. This
reserves the large device specific memory regions, but reduces the amount of usable
memory in 32-bit operating system.
--PciResAllocationRatio
Table 332. --PciResAllocationRatio
Attribute Details Description
Valid Argument AllocateEvenly, AllocateMoreToCpu1
Allocates PCI resources, buses, memory-mapped I/O (MMIO) space, and I/O space.
If set to AllocateEvenly, equal amount of memory is allocated to all the resources
when two CPUs are installed. When set to AllocateMoreToCpu1, larger amount of
device-specific memory is allocated, which in turn reduces the usable memory on a
system with a 32-bit operating system.
--PciSata
Table 333. --PciSata
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables the PCI Serial ATA controller.
--PciSlots
Table 334. --PciSlots
Attribute Details Description
Valid Argument Enabled, Disabled
96 Options for Dell Command | Configure 4.x