Reference Guide

--OsMode
Table 318. --OsMode
Attribute Details Description
Valid Argument Enabled, Disabled
Turns operating system installation mode on or off.
OsWatchdogTimer
Table 319. OsWatchdogTimer
Attribute Details Description
Valid Argument Enabled, Disabled
The watchdog-timer aids in the recovery of the operating system if the system stops
responding.
--OvrWrt
Table 320. --OvrWrt
Attribute Details Description
Valid Argument Read-only
This option is only used with the -o option to cause the output file to be overwritten if a
file of the same name already exists.
--OwnerPwd
Table 321. --OwnerPwd
Attribute Details Description
Valid Argument <password>
Sets, changes, or removes the owner password. The system cannot report the owner
password. The owner password is designed for companies that loan or lease systems. It
allows the leasing agency (the owner of the system) to remove any administrator, system,
or hard drive passwords that are set on the system by the lessee.
NOTE: Reboot the system to complete any owner password actions.
Example
NOTE: Password containing special characters must be provided in double inverted
commas (“”).
To set the password:
C:\>cctk --OwnerPwd=<new-password
You can set the owner password if the lower priority passwords (administrator, system, or
hard drive passwords) are not set.
NOTE: If owner password is set on a system, set the system or administrator
password for configuring the BIOS options on the system.
Options for Dell Command | Configure 4.x 93