Reference Guide

Table 261. --Lpt (continued)
Attribute Details Description
built-in parallel port to operate in Lpt2 mode, using I/O address 278. Lpt3 enables the
built-in parallel port to operate in Lpt3 mode, using I/O address 3BC.
--LptMode
Table 262. --LptMode
Attribute Details Description
Valid Argument Disabled, At, Ps2, Ecp, Epp, EcpDma1, EcpDma3
Determines how the parallel ports operate. Set the parallel port to:
● Disabled—Disables the built-in parallel port of the system.
● At—Enables the built-in parallel port of the system to operate in AT mode (output-only).
● Ps2—Enables the built-in parallel port of the system to operate in PS/2 mode (bi-
directional).
● Ecp—Enables the built-in parallel port of the system to operate in Extended Capability Port
(ECP) mode, no DMA channel assigned.
● Epp—Enables the built-in parallel port to operate in Enhanced Parallel Port (EPP) mode.
● EcpDma1—Enables the system’s built-in parallel port of the system to operate in ECP
mode DMA channel 1.
● EcpDma3—Enables the built-in parallel port of the system to operate in ECP mode DMA
channel 3.
Example
C:\>cctk --LptMode=At
LptMode=At
--M2PcieSsd0
Table 263. --M2PcieSsd0
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables M2 PCIE SSD 0.
--M2PcieSsd1
Table 264. --M2PcieSsd1
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables M2 PCIE SSD 1.
--M2PcieSsd2
Table 265. --M2PcieSsd2
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables the M.2 PCIe SSD 2.
82 Options for Dell Command | Configure 4.x