Reference Guide

--LimitCpuidValue
Table 257. --KbdBacklightTimeoutAc
Attribute Details Description
Valid Argument Enabled, Disabled
Limits the maximum value the processor standard CPUID function supports. Some
operating system will be unable to install if the maximum CPUID function supported is
greater than 3. If set to on, the CPUID function is limited to 3. If set to off, the CPUID
function is not limited to 3.
--LiquidCooler2
Table 258. --LiquidCooler2
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables the liquid cooler 2.
● Enabled—Enables the liquid cooler 2.
● Disabled—Disables the liquid cooler 2.
--LiquidCooler1
Table 259. --LiquidCooler1
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables the liquid cooler 1.
● Enabled—Enables the liquid cooler 1.
● Disabled—Disables the liquid cooler 1.
--LogicProc
Table 260. --LogicProc
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables hyper threading on the next system boot. On some Dell platforms that
support multi-core processor technology, this is enabled or disabled though the platform
does not support hyper threading. In this case, this command may enable or disable multi-
core processor technology.
--Lpt
Table 261. --Lpt
Attribute Details Description
Valid Argument Lpt1, Lpt2, Lpt3
Defines the parallel port configuration. Lpt1 enables the built-in parallel port of the system
to operate in Lpt1 mode, using Input/Output (I/O) address 378. Lpt2 enables the system’s
Options for Dell Command | Configure 4.x 81