Reference Guide

--Hdd3FanEnable
Table 195. --Hdd3FanEnable
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables error checking on the FAN_HDD3 fan controller.
NOTE: If the fan controller detects a fan, it automatically enables it.
--HddAcousticMode
Table 196. --HddAcousticMode
Attribute Details Description
Valid Argument Bypass, Quiet, Suggested, Performance
Sets the hard disk acoustic mode. If set to Bypass, BIOS does not modify the currently
set acoustic mode of the hard disks. Quiet sets the acoustic mode of the hard disks
to the quietest operation. Suggested sets the acoustic mode of the hard disks to the
setting suggested by the manufacturer. Performance sets the acoustic mode of the hard
disks for the highest disk performance.
--HddFailOver
Table 197. --HddFailOver
Attribute Details Description
Valid Argument Enabled, Disabled
Specifies the devices in the hard disk drive sequence menu that are attempted in the
boot sequence. If set to off, only the first device is attempted in the boot sequence. If
set to on, all devices are attempted as listed in the hard disk drive sequence.
--HddInfo
Table 198. --HddInfo
Attribute Details Description
Valid Argument Read-only
The option displays the details of the HDD. The information displays the name of the HDD
(HDD Name), whether the HDD is physically present (Present), whether a password
exists for the HDD (Pwd-Protected), whether a reboot is required to set the password
(Pending-Restart), and whether the changes to the password can be made only by an
administrator (Admin-only-change).
Example
C:\>cctk --HddInfo
HDD Information in the current system.
Index: 0
HDD Name: Internal
Present: Yes
Pwd-Protected: No
Pending-Restart: No
Admin-only-change: No
68 Options for Dell Command | Configure 4.x