Reference Guide

Table 180. --ForcePxeOnNextBoot (continued)
Attribute Details Description
● If enabled, when the BIOS boots next time, the first PXE-capable device is inserted as the
first device in the boot sequence. Enabling this value causes this operation on the next boot
only, and does not cause a change in the defined boot sequence of the system. The BIOS
chooses the first PXE-capable device as the onboard network controller of the system, if
present and enabled, or the first bootable network device found in the standard PCI search
order of the system, whichever comes first.
● If disabled, the boot override feature is disabled and the system boot sequence is in effect.
--FrontPanelErrDisplayMode
Table 181. --FrontPanelErrDisplayMode
Attribute Details Description
Valid Argument AllErr, FirstErr
Configures to report all the errors or only the first error on the front panel Liquid Crystal
Display (LCD).
● AllErr—All errors displayed on front panel LCD.
● FirstErr—Only first error displayed on front panel LCD.
--FrontBezelLEDIntensity
Table 182. --FrontBezelLEDIntensity
Attribute Details Description
Valid Argument Disabled, Low, Medium, and Full
Controls the light intensity of the LED which is there in the front bezel.
--FrontFan
Table 183. --FrontFan
Attribute Details Description
Valid Argument Enabled, Disabled
Sets the value to the FrontFan by using the following options:
● Enabled—When enabled, the front fan utilizes the thermal solution of the system.
● Disabled—When disabled, thermal solution of the system utilizes only the fan from
the back panel.
--FrontPowerButton
Table 184. --FrontPowerButton
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables the FrontPowerButton feature.
Options for Dell Command | Configure 4.x 65