Reference Guide

--DisketteReconfig
Table 124. --DisketteReconfig
Attribute Details Description
Valid Argument AnyTime, AtBootOnly
Allows the user to hot or warm plug a floppy drive into the system and make it functional.
If set to AtBootOnly, the drive will be functional after the system is restarted. If set to
AnyTime, reboot is not required.
--DisWLANRadio
Table 125. --DisWLANRadio
Attribute Details Description
Valid Argument Enabled, Disabled
WLAN radio stops functioning when stealth mode is enabled.
--DisWWANRadio
Table 126. --DisWWANRadio
Attribute Details Description
Valid Argument Enabled, Disabled
WWAN radio stops functioning when stealth mode is enabled.
--DisplayCloseState
Table 127. --DisplayCloseState
Attribute Details Description
Valid Argument Active, Suspend
Sets the system to active or suspend state, when the system lid is closed.
● Active—System remains in the active state when the system lid is closed.
● Suspend—System is forced to suspend when the system lid is closed.
--DisPwdJumper
Table 128. --DisPwdJumper
Attribute Details Description
Valid Argument Enabled, Disabled
DisPwdJumper controls the physical password clear jumper on the system board.
● Enabled—When this option is not selected, the password jumper on the system
board is activated to clear the BIOS admin and the user password.
● Disabled—When this option is selected, the password jumper is disabled, and the
BIOS passwords are not cleared.
54 Options for Dell Command | Configure 4.x