Reference Guide

Table 114. --DeepSleepCtrl (continued)
Attribute Details Description
Configures the system power mode when the system is in s4 and s5 state. If set
to S5Only, the system moves to the lowest-power off mode when in s5 state. If
set to S4AndS5 state, the system moves to the lowest-power off mode when in s4
and s5 states. When the system is in a low-power mode, it turns off most of the
power-consuming circuitry devices, to meet the 1 W power limit. It disables the Power
Management Event (PME), USB power, and so on.
--DeviceHotkeyAccess
Table 115. --DeviceHotkeyAccess
Attribute Details Description
Valid Argument Enabled, Disabled, and OnetimeEnable
DeviceHotkeyAccess manages whether you can access device configuration screen
through hotkeys during system reboot. This setting prevents the access to Intel®
RAID (CTRL+I), LSI RAID (CTRL+C), or Intel Management Engine BIOS Extension
(CTRL+P/F12).
● Enabled—Enabling device configuration hotkey allows you to access the device
configuration screen by pressing the hotkeys during the system reboot.
● One time enable—You can access the device configuration screen by using
hotkeys after a successful reboot. On the next system reboot, the setting reverts
back to a disabled state.
● Disabled—You cannot access the device configuration screen using hotkeys.
--DisGpuExtDisplay
Table 116. --DisGpuExtDisplay
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables the platform external displays.
NOTE: Embedded Display Port (eDP) will be enabled by Integrated Graphics
Processing Unit (iGPU).
● Enabled—Allows discrete Graphics Processing Unit (dGPU) to enable the platform
external displays such as HDMI, NB DP, Type-C, and so on with the purpose of
enabling discrete graphic features such as Eyefinity, Mosaic, 10bit DP displays, etc..
● Disabled—The normal hybrid graphics mode is enabled.
NOTE: This feature is used in hybrid graphics mode only.
--DisableDockDevicesexceptVideo
Table 117. --DeepSleepCtrl
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables all the non-video devices (serial, audio, LAN, and USB ports) on a
rugged dock.
52 Options for Dell Command | Configure 4.x