Reference Guide

Table 83. --Sequence (continued)
Attribute Details Description
● BootOrder --BootListType=Legacy --Sequence=hdd.*
NOTE: * represents grouping of the shortform of the device types.
The above example changes the sequence to embnic as first device and cdrom as second and
so on. Disable the device cdrom and enable the floppy device in the boot list.
--BootSeqSet
Table 84. --BootSeqSet
Attribute Details Description
Valid Argument DisketteFirst, HardDiskOnly, DevList, CdRomFirst
Sets the Initial Program Load (IPL) device sequence for the next system boot.
● DisketteFirst—Sets the devices in the sequence: diskette, hard drive, CD- ROM, and
option ROMs (if available).
● HardDiskOnly—Sets the devices in the sequence: hard drive and option ROMs (if
available).
● DevList—Sets the devices in the sequence: diskette, CD-ROM, hard drive, and option
ROMs (if available).
● CdRomFirst—Sets the devices in the sequence: CD-ROM, diskette, hard drive, option
ROMs (if available).
--BootSpeed
Table 85. --BootSpeed
Attribute Details Description
Valid Argument Default, Compatible
Sets microprocessor speed to default or compatible. If set to compatible, the Central
Processing Unit (CPU) speed will be significantly slower. This is implementation dependent.
There is no specific speed for compatible, except that it is significantly slower than default.
--BootTimeVideo
Table 86. --BootTimeVideo
Attribute Details Description
Valid Argument Onboard, Addin
Sets the onboard or first add-in video controller for boot time messages.
● Onboard—The onboard video controller is used for boot-time messages.
● Addin—The first add-in video controller is used for boot-time messages.
NOTE: Depending on the BIOS search and system slot layout, the first add-in device
changes.
Options for Dell Command | Configure 4.x 45