Reference Guide

BootOrder
Table 78. BootOrder
Attribute Details Description
Valid Argument None
Displays or sets the boot order sequence, activates boot list, and enables or disables the
supported devices for legacy boot list and for UEFI boot list. When you run the bootorder
option, the following information is displayed:
● Device Status—The current device status. It may be enabled or disabled.
● Device Number — A unique number to identify the device on the system.
● Device Type—The device type.
● Short Form—Short form of the device. If the system has many devices of the similar
device type, the short form of the device is displayed with a <number> notation. For
example, if the system has an internal Hard Disk Drive (HDD), a USB storage device, and a
modular Bay HDD, the short forms will be displayed as hdd.1, hdd.2, and hdd.3 respectively.
● Device Description — Description of the device.
Supported legacy devices:
● floppy — Floppy Disk
● hdd—Hard Disk
● cdrom—CDRom
● pcmcia—PCMCIA Device
● usbdev—USB Device
● nic — NIC
● usbfloppy—USB Floppy Disk
● usbhdd — USB Hard Disk
● usbcdrom — USB CDRom
●
embnic—Embedded NIC
● usbzip—USB ZIP
● usbdevzip—USB Device ZIP
● bev—BEV Device
Supported UEFI devices:
● hdd—Hard Disk
● cdrom—CDRom
● hsbhdd—USB Hard Disk
● usbdev—USB Device
● embnicipv4 — Embedded NIC IPV4
● embnicipv6—Embedded NIC IPV6
● fibrechannel — Fibre Channel
● embnic—Embedded NIC
● fibrechannelex — FibreEx Channel
● infiniband—Infiniband Device
● vendor—Vendor Device
● i1394—I1394 Device
● i2o—I20 Device
● uart—UART Device
● lun—LUN Device
● vlan—VLAN Device
● nvme—NVMe Device
● uri—URI Device
● ufs—UFS Device
● sd—SD Device
● bluetooth—Bluetooth Device
● wifi—Wi-Fi Device
● emmc—eMMC Device
42
Options for Dell Command | Configure 4.x