Reference Guide

--BlinkPsu1Led
Table 73. --BlinkPsu1Led
Attribute Details Description
Valid Argument Enabled
Sets the first Power Supply (PSU 1) status LED to blink. Enabling the LED to blink helps
to recognize the power supply probe in use while using ASM feature. For more details, see
Advanced System Management.
NOTE: This option is supported only on systems that support ASM.
--BlinkPsu2Led
Table 74. --BlinkPsu2Led
Attribute Details Description
Valid Argument Enabled
Sets the second Power Supply (PSU 2) status LED to blink. Enabling the LED to blink helps
to recognize the power supply probe in use while using ASM feature. For more details, see
Advanced System Management.
NOTE: This option is supported only on systems that support ASM.
--BlockSleep
Table 75. --BlockSleep
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables the Block S3 sleep state. When enabled, the system BIOS blocks all OSPM/
ACPI S3 (Suspend to RAM) requests and enforces the preboot authentication on all non-S3
resumes. When disabled, the system BIOS allows all Operating System-directed configuration
and Power Management (OSPM) or Advanced Configuration and Power Interface (ACPI) S3
suspend to Random Access Memory (RAM) operation. This moves the system authentication
to the operating system and prevents any preboot authentication on resume.
--BltInPntDevice
Table 76. --BltInPntDevice
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables built-in pointing device.
--BluetoothDevice
Table 77. --BluetoothDevice
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables bluetooth device.
Options for Dell Command | Configure 4.x 41