Reference Guide

Table 42. --AmtCap (continued)
Attribute Details Description
● Restrict MEBx Access—If Intel Active Management Technology is enabled, MEBx is not
available in pre-boot but you can provision AMT from OS.
● Disabled—If Intel Active Management Technology is disabled, MEBx is not available in
pre-boot. Once disabled, Intel Active Management Technology can only be enabled through
the BIOS interface. If the Intel AMT is already provisioned, AMT cannot be disabled. Un-
provisioning AMT is required to disable AMT.
--AntennaSwitch
Table 43. --AntennaSwitch
Attribute Details Description
Valid Argument AllInternal, WlanWwanExt, WlanGpsExt, WwanGpsExt, WlanExt, WwanExt, and GpsExt
● This setting determines the antenna usage when the system is connected to a docking
station. The option designates which wireless radio is connected to which dock
antenna. The System Antennas Only option indicates the system antennas that are
used, and the dock antennas that are not used, even when the system is docked.
● When the system is undocked, the system antennas are used and this setting has no
effect. Ant A indicates dock antenna A, and Ant B indicates dock antenna B.
NOTE: This setting applies to rugged docking stations and does not apply to USB
Type-C docking stations.
--AsfMode
Table 44. --AsfMode
Attribute Details Description
Valid Argument On, Off, AlertOnly, Dash
Sets the alert standard format.
● On—Turns the ASF mode on.
● Off—Turns the ASF mode off.
● AlertOnly—Enables only error messages.
● Dash—Enables LOM to have both DASH and ASF 2.0 functionality.
--Aspm
Table 45. --Aspm
Attribute Details Description
Valid Argument Auto, Disabled, L1
Set the Active State Power Management (ASPM) level.
● Auto—There is handshaking between the device and PCI Express hub to determine the
best ASPM mode supported by the device.
● Disabled—ASPM power management is turned off always.
● L1—ASPM power management is set to use L1.
34 Options for Dell Command | Configure 4.x