Reference Guide

Table 9. -O or --Outfile (continued)
Attribute Details Description
set only on devices that are available in the system. It is recommended that you apply
the INI file on a system with the same active boot list as of the system from where the
INI file is generated.
Example
C:\>cctk -o <c:/cctk>/filename.ini
NOTE: For the systems running Ubuntu Core operating system, run dcc.cctk -o /var/
snap/dcc/current/<filename>.ini
--Propowntag
Table 10. --Propowntag
Attribute Details Description
Valid Argument NA
Sets the Dell property ownership tag. If an option is not given, Dell Command | Configure
reports the current property ownership tag.
NOTE: The maximum length of property ownership tag is 80 characters for desktops
and 48 characters for laptop.
--Version
Table 11. --Version
Attribute Details Description
Valid Argument Read-only
Displays the version information, current time, and date for the utility. This is a read-only
option.
BIOSConnect Profiles
Dell Command | Configure command line interface supports the BiosConnect feature. Bios Connect feature contains five
profiles. You can read, modify, and delete the profiles.
● ConnectionProfile
● CloudAppProfile
● CsosProfile
● FotaProfile
● HttpBootProfile
Table 12. BIOSConnect Profiles
BIOS Password
Status
Description
When the BIOS
password is set
To read the BIOSConnect profile from the BIOS, run the following command: cctk.exe
BIOSConnect profile --Get --valsyspwd=pwd.
For example, cctk.exe ConnectionProfile --Get --valsyspwd=pwd.
To set the BIOSConnect profile from the BIOS, run the following command: cctk.exe
BIOSConnect profile --Set=C:\connectionprofile.xml --valsyspwd=pwd.
24 Options for Dell Command | Configure 4.x