Reference Guide

ASM probes and options
ASM allows to display the details from the available probes. The following table lists the probes and the corresponding options
for displaying the probe details.
Table 585. ASM probes and options
ASM Probes Options
Voltage v
Current c
Temperature t
Power supply p
Cooling device f
All probes all
Displaying the probe details
Displays the details of from the available probes. The probes are available for Power Supply, Voltage, Current, Temperature, and
Cooling Device or Fan.
To display the probe details, type:
cctk Advsm --Report=<option>
NOTE: Here, option represents V, C, T, P, F, or All.
For example, to display the details of voltage probe, type:
cctk Advsm --Report=V
To display the details of all the available probes, type:
cctk Advsm --Report=All
Setting the noncritical threshold values
Sets the noncritical threshold values for a given probe. It is possible to set upper non critical threshold values for Voltage,
Current, Temperature, and cooling device probes
To set the noncritical threshold values for a probe, type:
cctk Advsm --Set=<cctk option name>:<upper non critical threshold value>
NOTE:
Here, cctk option name is the component for which you want to set the noncritical threshold values in a probe.
You can obtain the cctk option name for a probe using the report command. See User’s Guide for more information.
For example, to set the noncritical threshold values for a voltage probe, type:
cctk Advsm --Set=Voltage_1:10
For example, to set only the upper noncritical threshold value for a current probe, type:
cctk Advsm --Set=Current_1:100
For example, to set the noncritical threshold values for a cooling probe, type:
cctk Advsm --Set=Cd_1:10
Options for Dell Command | Configure 4.x
151