Reference Guide

Table 576. --WirelessSwitchWlanCtrl (continued)
Attribute Details Description
● Enabled—If the wireless physical switch is on, turns the wireless LAN on and WiGig radio
on. If the wireless switch is off, turns the wireless LAN on and WiGig radio off.
● Disabled—The wireless physical switch does not effect the wireless LAN and WiGig radios.
--WirelessSwitchGps
Table 577. --WirelessSwitchGps
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables the effect of physical wireless switch on the GPS radio of the wireless
WAN card.
● Enabled—If enabled, wireless switch turns the GPS radio of the wireless WAN card on or
off.
● Disabled—If disabled, wireless switch does not have any effect on the state of the GPS
radio of the wireless WAN card.
--WwanAutoSense
Table 578. --WwanAutoSense
Attribute Details Description
Valid Argument Enabled, Disabled
When enabled, this feature disables the WWAN radio if the system is connected to a wired
network and vice-versa.
--WwanAntSwitch
Table 579. --WwanAntSwitch
Attribute Details Description
Valid Argument DockAntenna, SystemAntenna
This setting configures on a radio-by-radio basis to decide which antenna to be used, when the
system is docked. When the system is undocked, the system antennas are used and there is no
impact.
NOTE: This setting applies to Rugged docking stations and does not apply to USB Type-C
docking stations.
DockAntenna—If set to the DockAntenna, then the radio switches to use the external
docking station antenna.
SystemAntenna—If set to the SystemAntenna, the radio continues to use the internal
system antenna.
--WWanBusMode
Table 580. --WWanBusMode
Attribute Details Description
Valid Argument PcieMode, UsbMode
Options for Dell Command | Configure 4.x 147