Reference Guide

--WatchdogTimer
Table 558. --WatchdogTimer
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables the system to reboot or reset when the watchdog time expires.
--WdtOsBootProtection
Table 559. --WdtOsBootProtection
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables Watchdog OS Boot Protection.
● Disable—The application cannot configure a chipset-based timer to reset or shutdown
the system. By default the Application Watchdog Timer is disabled
● Enable—The application configures a chipset-based timer to reset or shutdown the
system.
--WifiCatcherChanges
Table 560. --WifiCatcherChanges
Attribute Details Description
Valid Argument Permit, Deny
Permits or denies Wi-Fi catcher changes. If the administrator password is not set, this setting
will have no effect.
--WifiLocator
Table 561. --WifiLocator
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables the Wi-Fi locator. When enabled, the locator feature can be activated
during S3 to indicate the presence and intensity of wireless network without fully waking the
system.
--WiGigRadioStealthMode
Table 562. --WiGigRadioStealthMode
Attribute Details Description
Valid Argument TurnOff, Unchanged
Configures or displays the state of Wireless Gigabit Alliance (WiGig) radio depending on the
Unobtrusive mode or stealth mode is enabled or disabled.
● TurnOff—Turns off the WiGig radio if the Unobtrusive mode or stealth mode is enabled.
● Unchanged—Retains the current state of the Wigig radio.
Options for Dell Command | Configure 4.x 143