Reference Guide

--SysId
Table 441. --SysId
Attribute Details Description
Valid Arguments Read-only
Displays the Dell System’s ID byte for systems that support it. The value of this feature
is -1 if the system does not support it.
--SysLogoOnIrst
Table 442. --SysLogoOnIrst
Attribute Details Description
Valid Arguments Enabled, Disabled
Enables or disables displaying the system logo from cache, during system resume using
Intel Rapid Start Technology.
● Enabled—Enables displaying the system logo from cache, during system resume
using Intel Rapid Start Technology.
● Disabled—Disables displaying the system logo from cache, during system resume
using Intel Rapid Start Technology.
--SysName
Table 443. --SysName
Attribute Details Description
Valid Arguments Read-only
Displays name of the system.
--SysPwd
Table 444. --SysPwd
Attribute Details Description
Valid Arguments <password>
Sets the system password. An argument is required. The password cannot be reported.
Initially you can set the password using Dell Command | Configure. If you want to
remove the password, provide one blank space and the old password.
Example
NOTE: Password containing special characters must be provided in double inverted
commas (“”).
● To set the password:
C:\>cctk --SysPwd=<new-password>
● To change the password:
C:\>cctk --SysPwd=<old-password> --ValSysPwd=<new-
password>
●
To remove the password:
C:\>cctk --SysPwd= --ValSysPwd=<old-password>
120 Options for Dell Command | Configure 4.x