Reference Guide

--SpeedShift
Table 427. --SpeedShift
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables the Intel Speed Shift Technology support. Setting this option to
Enabled allows the operating system to select the appropriate processor performance
automatically.
--SplashScreen
Table 428. --SplashScreen
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables the display of the splash or summary screen, rather than the detail
of the POST flow.
--Sriov
Table 429. --Sriov
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables BIOS support for Single Root I/O Virtualization (SR-IOV) devices.
--StandbyState
Table 430. --StandbyState
Attribute Details Description
Valid Argument S1, S3
Sets the system to ACPI S1 or S3 sleeping state when the systems enters standby mode.
--StealthMode
Table 431. --StealthMode
Attribute Details Description
Valid Argument Enabled, Disabled
Configures the Dell Stealth Mode features. Sets the operation mode of the system
elements. If enabled, the system operates in the preprogrammed stealth mode. If
disabled, the system operates in the normal mode. For example,
● If stealth mode is enabled and the device is set to TurnOff, then you can press
Fn+F7 keys to turn the device off.
● If the stealth mode is enabled and the device stealth mode is set to Unchanged, then
the device retains its status and remains unchanged while pressing Fn+F7 keys.
● If the stealth mode is disabled, then the state of the device cannot be changed by the
individual device stealth modes.
Following are the system elements that have effect of stealth mode on them:
Options for Dell Command | Configure 4.x 117