Reference Guide

Table 395. --SecureBootMode (continued)
Attribute Details Description
NOTE: Attempting the transition to Audit Mode by writing '1' to the DA Token may fail
if the system is not in OSMM.
--SoftGuardEn
Table 396. --SoftGuardEn
Attribute Details Description
Valid Argument Enabled, Disabled, SoftControlled
Configures Secure Guard Extensions (SGX) feature. You can select Enabled or
SoftControlled if this option is disabled.
--SedBlockSidAuthentication
Table 397. --SedBlockSidAuthentication
Attribute Details Description
Valid Argument Enabled, Disabled
When there is no drive ownership and the blocksid is enabled, the BIOS sends the
SedBlockSidAuthentication authentication command to SED drives. When disabled,
the BIOS does not send the Block SID command.
NOTE: You can disable SedBlockSidAuthentication in manufacturing mode or
while setting up the BIOS Setup Administrator password.
NOTE: The read-only mechanism can be changed when the system is in
manufacturing mode, while the SedBlockSidAuthentication is disabled.
--Serial1
Table 398. --Serial1
Attribute Details Description
Valid Argument Disabled, Auto, Com1,Com2, Com3, Com4, Com1_bmc, BmcSerial, BmcLan, Rac, Rs232,
Rs422, Rs485
Configures the 1st serial port of the system.
--Serial2
Table 399. --Serial2
Attribute Details Description
Valid Argument Disabled, Auto, Com2, Com4, Rs232, Rs422, Rs485
Configures the 2nd serial port of the system.
110 Options for Dell Command | Configure 4.x