Reference Guide

Table 354. --PrimaryBattChargeCfg (continued)
Attribute Details Description
● Custom—The battery charging starts and stops based on user input. The start value
range should be 50-95 percent, the stop value range should be 55-100 percent, and the
difference between the start and stop values should be greater than or equal to 5.
Example
C:\>cctk --PrimaryBattChargeCfg=Standard
PrimaryBattChargeCfg=Standard
C:\>cctk --PrimaryBattChargeCfg=Custom:50-70
PrimaryBattChargeCfg=Custom:50-70
NOTE: The format to set custom option is custom:start value-stop value.
The start value range must be 50–95 percentage and the stop value range must be
55–100 percentage. The difference between the start and stop values must be greater
than or equal to 5.
--PrimaryVideoSlot
Table 355. --PrimaryVideoSlot
Attribute Details Description
Valid Argument Auto, Slot0, Slot1, Slot2, Slot3, Slot4, Slot5, Slot6, Slot7, Slot8, Slot9, Slot10, Slot11,
Slot12, Slot13, Slot14, Slot15Onboard
Configuring the slot for Primary video display.
● Onboard—Sets the onboard video device slot as primary video device slot.
● Auto—Scans PCI buses and uses the first video device slot found with video card
as a primary video device slot.
● Slot0-Slot15—Sets the specified slot number as a primary video device slot.
NOTE: If a video card is not available in the specified slot number, the system will
scan the PCI buses and uses the first video device slot found with video card as a
primary video device.
Example
C:\>cctk --PrimaryVideoSlot=Auto
PrimaryVideoSlot=Auto
--PrimIdeMast
Table 356. --PrimIdeMast
Attribute Details Description
Valid Argument Auto, Off
Enables or disables primary IDE master channel.
--PrimIdeSlav
Table 357. --PrimIdeSlav
Attribute Details Description
Valid Argument Auto, Off
Enables or disables primary parallel IDE slave channel.
102 Options for Dell Command | Configure 4.x