Install Guide

Dell Command | Configure 4.5 for Windows
Preinstallation Environment
Windows Preinstallation Environment (WinPe) provides a stand-alone preinstallation environment that is used to prepare a
system for Windows installation. For client systems that do not have an operating system that is installed, you can create a
bootable image that contains Dell Command | Configure to run the Dell Command | Configure commands on Windows PE. To
create Windows PE 2.0 and 3.0 images, you can use Windows Automated Installation Kit (Windows AIK), and to create Windows
PE 4.0, Windows PE 5.0, and Windows PE 10.0 images, you can use Windows Assessment and Deployment Kit (Windows ADK).
Using Windows PE 2.0, Windows PE 3.0, Windows PE 4.0, Windows PE 5.0, and Windows PE 10.0, you can integrate Dell
Command | Configure.
Related links:
● Creating a bootable image PE using Windows PE 4.0, 5.0 and 10.0
● Creating a bootable image PE using Windows PE 2.0 and 3.0
Topics:
• Creating a bootable image preinstallation environment using Windows PE 4.0, 5.0, and 10.0
• Creating a bootable image preinstallation environment using Windows PE 2.0 and 3.0
Creating a bootable image preinstallation environment
using Windows PE 4.0, 5.0, and 10.0
1. From the Microsoft website, download and install Windows ADK on the client system.
NOTE: While installing select only Deployment Tools and Windows Preinstallation Environment (Windows PE).
2. From dell.com/support, download and install Dell Command | Configure.
3. Install Dell Command | Configure.
4. Integrate the Dell Command | Configure directory structure into an ISO file to create a bootable ISO image.
Related Link:
● Integrating Dell Command | Configure directory structure to an ISO file using Windows PE 10.0
● Integrating Dell Command | Configure directory structure to an ISO file using Windows PE 5.0
● Integrating Dell Command | Configure directory structure to an ISO file using Windows PE 4.0
Integrating the Dell Command | Configure directory structure into
an ISO file using Windows PE 10.0
1. Install the Windows 10 operating system.
2. Download and install Windows ADK for Windows 10 operating system.
3. Create a Windows PE 10.0 image.
Related links:
● Creating Windows PE 10.0 64-bit image
● Creating Windows PE 10.0 32-bit image
8
20 Dell Command | Configure 4.5 for Windows Preinstallation Environment