Users Guide

Table Of Contents

1. Click the EXPORT.EXE option to export the BIOS configuration as an .exe file.

2. The Setup, System or Hard Disk Drive Password screen is displayed prompting you to type a password.

3. Depending on the type of password set on the target system, determine which password to provide based on the table

below:

Figure 1. Password Reference Table

For example,

● If the setup password is set in the system, and you want to configure BIOS tokens/features, you need to provide setup

password.

● If the setup and system passwords are set in the system, and you want to configure BIOS tokens/features, you need to

provide setup password.

● If the setup and system passwords are set in the system, and if you want to configure BIOS tokens/features as well as

change system password, you need to provide both system and setup passwords.

● If the setup, system and hard disk drive passwords are set in the system, and if you want to configure BIOS tokens/

features as well as change hard disk drive password, you need to provide both setup and hard disk drive passwords.

4. Provide appropriate password(s) in order to be able to configure the desired settings.

● To provide a setup password, click Setup Password, then select the Use the password information below option,

and then type the setup password.

● To provide a system password, click System Password, then select the Use the password information below option

and type the system password.

● To provide a hard disk drive password, click Hard Disk Drive Password, then select the Use the password

information below option and type the hard disk drive password.

5. If the target system does not have a setup, system, or hard disk drive password, then select No password is required.

6. The following warning message By exporting this BIOS configuration, your system, setup and hdd passwords will no

longer be secure. If you would like to proceed with your passwords displayed in clear text, select Contonue. If

you want to hide your passwords, select Mask is displayed. Click MASK to protect your password, else click Continue.

7. Click OK..

NOTE: SCE can be generated on non WMI-ACPI system using multi-system package.

Exporting the configuration without setting values

To export asset and propowntag without specifying changes to values:

Select the Apply Settings check box of the corresponding option and export.

Target system configuration

You can apply the exported INI, CCTK, SCE, and shell script files to configure the target client systems.