Reference Guide

Table 319. --PwrOffWlanStealthMode (continued)
Attribute Details Description
for Stealth Mode control of the Intel 8260 card for the following use cases: Pre-boot
applications, Linux OS, or Windows OS without Dell recommended drivers.
● Enabled — Disconnects power from the Intel 8260 Wireless NIC when the Stealth Mode is
enabled.
● Disabled — Does not disconnect power from the Intel 8260 Wireless NIC when the Stealth
Mode is enabled.
--PowerUsageMode
Table 320. --PowerUsageMode
Attribute Details Description
Valid Argument
● PowerSaver
● Balanced
● Performance
● HighPerformance
Sets the system power usage mode using the following options:
● PowerSaver - This mode reduces processor sustained power to enhance battery life
depending on the use case. This mode may impact the system performance.
● Balanced - This mode balances performance, noise, temperature, and battery life. The
default option is Balanced Mode.
● Performance - This mode uses the processor's typical power and utilizes discrete graphics.
● HighPerformance - This mode increases processor sustained power to produce higher
system performance, but produces more noise, increases system surface temperature, and
reduces the battery life.
--PowerWarn
Table 321. --PowerWarn
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables performance limitation messages based on power supply capacity.
--PpiBypassSedBlockSidCommand
Table 322. --PpiBypassSedBlockSidCommand
Attribute Details Description
Valid Argument Enabled, Disabled
When there is no drive ownership and the PpiBypassSedBlockSidCommand is enabled, the
BIOS requires user input while sending the Block SID authentication command to SED drives.
When PpiBypassSedBlockSidCommand is disabled, the BIOS does not require user input while
sending the Block SID command.
NOTE: You can disable PpibypassSedBlockSidCommand in manufacturing mode or while
setting up the BIOS Setup Administrator password.
94 Options for Dell Command | Configure 4.2