Reference Guide

--PowerButton
Table 315. --PowerButton
Attribute Details Description
Valid Argument Enabled, Disabled, and Partial Disable
Enables, disables, or partially disables the power button.
--PowerOnLidOpen
Table 316. --PowerOnLidOpen
Attribute Details Description
Valid Argument Enabled, Disabled
Set the PowerOnLidOpen feature using the following options:
● Enabled - If the feature is set to enabled, the system powers up from the off state
whenever the lid is opened. This system powers on when powered either by the AC adapter
or the system battery.
● Disabled - If this feature is set to disabled, the system does not power up from the off
state whenever the lid is opened.
--PowerLogClear
Table 317. --PowerLogClear
Attribute Details Description
Valid Argument Enabled, Disabled
Prevents or allows the power event log to be cleared on the next boot.
● Enabled — Clears the power event log on the next boot.
● Disabled — Does not clear the power event log on the next boot.
--PowerMgmt
Table 318. --PowerMgmt
Attribute Details Description
Valid Argument Disabled, Minimum, Regular, Maximum
Sets the power management settings.
--PwrOffWlanStealthMode
Table 319. --PwrOffWlanStealthMode
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables the poweroffintel8260stealthmode feature.
NOTE: Disabling Stealth Mode does not automatically restore the power or functionality
of the card until the next complete boot. This nonstandard mode is available as an option
Options for Dell Command | Configure 4.2 93