Reference Guide

--PciResAllocationRatio
Table 302. --PciResAllocationRatio
Attribute Details Description
Valid Argument AllocateEvenly, AllocateMoreToCpu1
Allocates PCI resources, buses, memory-mapped I/O (MMIO) space, and I/O space. If set to
AllocateEvenly, equal amount of memory is allocated to all the resources when two CPUs are
installed. When set to AllocateMoreToCpu1, larger amount of device-specific memory is
allocated, which in turn reduces the usable memory on a system with a 32-bit operating
system.
--PciSata
Table 303. --PciSata
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables the PCI Serial ATA controller.
--PciSlots
Table 304. --PciSlots
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables the add-in PCI slots of the system.
--Pcmcia
Table 305. --Pcmcia
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables the PCMCIA device slot.
--PeakShiftBatteryThreshold
Table 306. --PeakShiftBatteryThreshold
Attribute Details Description
Valid Argument integers ranging from 15 to 100
Sets the value of Peak Shift battery threshold. When the Peak Shift battery threshold level is
reached, the system starts using AC power. Setting the value to 00 percent allows the system
to use power only from the battery during Peak Shift duration (Peak Shift Start time and Peak
shift End time).
Example
C:\>cctk --PeakShiftBatteryThreshold=50
PeakShiftBatteryThreshold=50
90 Options for Dell Command | Configure 4.2