Reference Guide

--Hdd3FanEnable
Table 176. --Hdd3FanEnable
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables error checking on the FAN_HDD3 fan controller.
NOTE: If the fan controller detects a fan, it automatically enables it.
--HddAcousticMode
Table 177. --HddAcousticMode
Attribute Details Description
Valid Argument Bypass, Quiet, Suggested, Performance
Sets the hard disk acoustic mode. If set to Bypass, BIOS does not modify the currently set
acoustic mode of the hard disks. Quiet sets the acoustic mode of the hard disks to the
quietest operation. Suggested sets the acoustic mode of the hard disks to the setting
suggested by the manufacturer. Performance sets the acoustic mode of the hard disks for
the highest disk performance.
--HddFailOver
Table 178. --HddFailOver
Attribute Details Description
Valid Argument Enabled, Disabled
Specifies the devices in the hard disk drive sequence menu that are attempted in the boot
sequence. If set to off, only the first device is attempted in the boot sequence. If set to on, all
devices are attempted as listed in the hard disk drive sequence.
--HddInfo
Table 179. --HddInfo
Attribute Details Description
Valid Argument Read-only
The option displays the details of the HDD. The information displays the name of the HDD
(HDD Name), whether the HDD is physically present (Present), whether a password exists
for the HDD (Pwd-Protected), whether a reboot is required to set the password
(Pending-Restart), and whether the changes to the password can be made only by an
administrator (Admin-only-change).
Example
C:\>cctk --HddInfo
HDD Information in the current system.
Index: 0
HDD Name: Internal
Present: Yes
Pwd-Protected: No
Pending-Restart: No
Admin-only-change: No
64 Options for Dell Command | Configure 4.2