Reference Guide

--DockSupportOnBattery
Table 116. --DockSupportOnBattery
Attribute Details Description
Valid Argument Enabled, Disabled
Enabling this feature allows you to use the docking station when AC power is absent, but only
when the battery is preceding a certain charge percentage. The percentage may change per
battery and per platform. For example, the dock may only be powered when the battery is at
60 percent charge or higher, and when the battery drops below this level (without AC power)
the dock loses power.
--DockDisplayThruIntGfx
Table 117. --DockDisplayThruIntGfx
Attribute Details Description
Valid Argument Enabled, Disabled
The Dock Display Port Through Integrated Graphics feature enables the docking station DVI
no1 or Display Port no1 interface to drive an external video display when Switchable Graphics is
enabled and running from the integrated graphics controller.
--DramPrefetch
Table 118. --DramPrefetch
Attribute Details Description
Valid Argument Enabled, Disabled
Sets the Dynamic Random Access Memory (DRAM) to the following:
● Enabled — Enables DRAM references from triggering DRAM prefetch requests.
● Disabled — Disables DRAM references from triggering DRAM prefetch requests.
--DRmt
Table 119. --DRmt
Attribute Details Description
Valid Argument Enabled, Disabled
Dell Reliable Memory Technology configures the system to detect and correct the software
errors in a block of RAM. When enabled, the system detects and corrects the software errors.
--DustFilter
Table 120. --DustFilter
Attribute Details Description
Valid Argument Disabled, 15days, 30days, 60days, 90days, 120days, 150days, 180days
Enables or disables the BIOS messages for maintaining the optional dust filter installed in the
computer. BIOS generates a pre-boot reminder to clean or replace the dust filter based on the
interval settings.
52 Options for Dell Command | Configure 4.2