Reference Guide

--Dbpm
Table 107. --Dbpm
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables demand-based power management.
--Dbs
Table 108. --Dbs
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables demand-based power management.
--Decrypt
Table 109. --Decrypt
Attribute Details Description
Valid Argument Read-only
Allow to Decrypt.
--DeepSleepCtrl
Table 110. --DeepSleepCtrl
Attribute Details Description
Valid Argument S5Only, S4AndS5, Disabled
Configures the system power mode when the system is in s4 and s5 state. If set to S5Only,
the system moves to the lowest-power off mode when in s5 state. If set to S4AndS5 state,
the system moves to the lowest-power off mode when in s4 and s5 states. When the system is
in a low-power mode, it turns off most of the power-consuming circuitry devices, to meet the 1
W power limit. It disables the Power Management Event (PME), USB power, and so on.
--DisGpuExtDisplay
Table 111. --DisGpuExtDisplay
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables the platform external displays.
NOTE: Embedded Display Port (eDP) will be enabled by Integrated Graphics Processing Unit
(iGPU).
● Enabled — Allows discrete Graphics Processing Unit (dGPU) to enable the platform external
displays such as HDMI, NB DP, Type-C, and so on with the purpose of enabling discrete graphic
features such as Eyefinity, Mosaic, 10bit DP displays, etc..
● Disabled — The normal hybrid graphics mode is enabled.
50 Options for Dell Command | Configure 4.2