Reference Guide

Table 90. --CanBus (continued)
Attribute Details Description
Enables or disables the Controller Area Network (CAN) Bus.
--ChasIntrusion
Table 91. --ChasIntrusion
Attribute Details Description
Valid Argument Enabled, Disabled, SilentEnable
Enables or disables the system to detect and report chassis intrusion events to the system
display on boot-up.
--ChassisIntruStatus
Table 92. --ChassisIntruStatus
Attribute Details Description
Valid Argument DoorOpen, Tripped, DoorClosed, TripReset
Displays the status of chassis intrusion. All the values are read-only except tripreset.
● DoorOpen — Indicates chassis door is opened.
● Tripped — Indicates the chassis door is opened since the last time the sensor detection
logic was reset.
● DoorClosed — Indicates chassis door is closed.
● TripReset — Resets the sensor detection logic to detect the next closed-to-open
transition on the chassis door.
--ClearDellRmtLog
Table 93. --ClearDellRmtLog
Attribute Details Description
Valid Argument Enabled, Disabled
--CmosDefaults
Table 94. --CmosDefaults
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables the request for a default of CMOS values when the system reboots.
--CompletionCode
Table 95. --CompletionCode
Attribute Details Description
Valid Argument Read-only
46 Options for Dell Command | Configure 4.2