Reference Guide

--BlockSleep
Table 72. --BlockSleep
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables the Block S3 sleep state. When enabled, the system BIOS blocks all OSPM/
ACPI S3 (Suspend to RAM) requests and enforces the preboot authentication on all non-S3
resumes. When disabled, the system BIOS allows all Operating System-directed configuration
and Power Management (OSPM) or Advanced Configuration and Power Interface (ACPI) S3
suspend to Random Access Memory (RAM) operation. This moves the system authentication
to the operating system and prevents any preboot authentication on resume.
--BltInPntDevice
Table 73. --BltInPntDevice
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables built-in pointing device.
--BluetoothDevice
Table 74. --BluetoothDevice
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables bluetooth device.
--BluetoothStealthMode
Table 75. --BluetoothStealthMode
Attribute Details Description
Valid Argument Unchanged, TurnOff
Configures the state of bluetooth radio depending on whether the Stealth mode is enabled or
disabled.
● Unchanged — Retains the current state of the bluetooth.
● TurnOff — Turns off the bluetooth radio if the stealth mode is enabled.
BootOrder
Table 76. BootOrder
Attribute Details Description
Valid Argument None
Displays or sets the boot order sequence, activates boot list, and enables or disables the
supported devices for legacy boot list and for UEFI boot list.
When you run the bootorder option, the following information is displayed:
40 Options for Dell Command | Configure 4.2