Reference Guide

Table 54. --Bezelir (continued)
Attribute Details Description
Sets the Embedded Server Management (ESM) configuration.
--BiosAutoRcvr
Table 55. --BiosAutoRcvr
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables BIOS auto recovery feature.
● Enabled — If BIOS corruption is detected, the system automatically recovers BIOS without
any user interaction.
● Disabled — Disables BIOS auto recovery feature.
NOTE: This feature is effective only if the biosrecovery option is enabled.
--BiosCharacteristics
Table 56. --BiosCharacteristics
Attribute Details Description
Valid Argument Read-only
Displays the features supported by the specific version of the BIOS. This contains bit-flags
which define support attributes for the BIOS and the system. The first 32-bits are from the
reference specification available on the Distributed Management Task Force at dmtf.org.
These must be set only if the system supports the following features: Industry Standard
Architecture (ISA), Extended Industry Standard Architecture (EISA), PCI, Personal Computer
Memory Card International Association (PC Card/PCMCIA), PnP, Advanced power
management (APM), Upgradeable BIOS, BIOS Shadowing allowed, Video Electronics Standards
Association (VL VESA), Extended System Configuration Data (ESCD).
● 32 to 47 are always set to 0 by Dell-developed BIOS.
● 48 sets to 1 if the built-in NIC supports MagicPacket.
● 49 sets to 1 if the system supports Wake-on-LAN.
● 50 sets to 1 if the system supports chassis intrusion.
● 51 sets to 1 if the built-in NIC supports pattern-matching.
● 52 sets to 1 if the system BIOS supports a seven character service tag.
● 53 to 63 are reserved for future assignments.
--BIOSConnect
Table 57. --BIOSConnect
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables BIOS Connect feature.
36 Options for Dell Command | Configure 4.2