Reference Guide

Table 50. --AutoOnMn (continued)
Attribute Details Description
Example
C:\>cctk --AutoOnMn=30
AutoOnMn=30
--AutoOSRecoveryThreshold
Table 51. --AutoOSRecoveryThreshold
Attribute Details Description
Valid Argument OFF, 1, 2, 3
Sets the threshold value for auto OS recovery. Controls the automatic boot flow for
SupportAssist System Resolution console and for Dell OS Recovery Tool. The system boots to
the SupportAssist System Resolution console and for Dell OS Recovery Tool if,
● the primary operating system fails to boot consecutively.
● the count of boot failure is greater than or equal to the value of the Auto OS Recovery
threshold setup option.
● SupportAssist OS Recovery option is enabled.
NOTE: If Auto OS Recovery threshold is set to OFF, then all automatic boot flow for
SupportAssist System Resolution console and for Dell OS Recovery Tool will be disabled.
--AutoOnPeriod
Table 52. --AutoOnPeriod
Attribute Details Description
Valid Argument integers ranging from 0 to 254
Defines the time after which the system should automatically wake up from Standby,
Hibernate, or Switched off mode.
NOTE: The system wakes up from Sleep, Hibernate, or Switched off mode only if the
autoon (AutoOn) option is enabled for everyday of the week.
--Camera2
Table 53. --Camera2
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables the camera available at the back of the system.
● Enabled — Enables the camera available at the back of the system.
● Disabled — Disables the camera available at the back of the system.
--Bezelir
Table 54. --Bezelir
Attribute Details Description
Valid Argument Enabled, Disabled
Options for Dell Command | Configure 4.2 35