Reference Guide

Table 42. --Aspm (continued)
Attribute Details Description
● Disabled — ASPM power management is turned off always.
● L1 — ASPM power management is set to use L1.
--Asset
Table 43. --Asset
Attribute Details Description
Valid Argument <string>
Displays or sets the customer-programmable asset tag number for a system. The maximum
length of an asset tag is 10 characters. Asset tag values should not contain any spaces.
--AssignIntr
Table 44. --AssignIntr
Attribute Details Description
Valid Argument Standard, Distributed
This option controls the interrupted assignment of PCI devices in the system. This option is set
to standard by default, causing standard interrupt routing that uses INTA, B, C, D for all PCIe
devices. When set to distributed, the interrupt routing is rerouted at the MCH root ports to
minimize sharing of interrupts across all PCIe (and PCI-X in PIC mode) devices.
--AtgSystem
Table 45. --AtgSystem
Attribute Details Description
Valid Argument Enabled, Disabled
Sets or removes the Complementary Metal Oxide Semiconductor (CMOS) bit to indicate
whether the system uses an All Terrain Gear (ATG) base or not.
--AttemptLegacyBoot
Table 46. --AttemptLegacyBoot
Attribute Details Description
Valid Argument Enabled, Disabled
Determines if BIOS should attempt to boot from the legacy boot list when the UEFI boot list
fails.
● Enabled — If the UEFI boot list fails, then BIOS attempts to boot from the Legacy boot
list.
● Disabled — BIOS discontinues the booting process if the UEFI boot list fails.
Options for Dell Command | Configure 4.2 33