Reference Guide

Table Of Contents
--AdiModeChannel8
Table 23. --AdiModeChannel8
Attribute Details Description
Valid Argument Unused, AdcInput, DacOutput, DacAndAdc, Gpio
Sets the defined Analog/Digital Interface mode for channel 8.
Unused - Channel is unused.
AdcInput - Sets the channel mode as Analog-to-Digital Converter (ADC) input.
DacOutput - Sets the channel mode as Digital-to-Analog Converter (DAC) output.
DacAndAdc - Sets the channel mode as DAC output, but can be monitored through ADC
input.
Gpio - Sets the channel mode as General Purpose Input or Output.
--AdjCachePrefetch
Table 24. --AdjCachePrefetch
Attribute details Description
Valid Argument Enabled, Disabled
Enables or disables the adjacent cache line prefetch.
Enabled The processor fetches the cache line containing the currently requested data,
and pre-fetches the following cache line.
Disabled The processor fetches only the cache line containing the currently requested
data.
--AdminSetupLockout
Table 25. --AdminSetupLockout
Attribute Details Description
Valid Argument
Enabled, Disabled
Enables or disables the admin setup lockout.
Enabled If administrator password is set for the system, user can view the setup
screens only after entering the correct administrator password. If administrator password is
not set, user can view the setup screens.
Disabled User can view the Setup screens without entering administrator password
even if the administrator password is set in the system.
--AdvBatteryChargeCfg
Table 26. --AdvBatteryChargeCfg
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables the Advanced Battery charge mode. Advanced Battery charge mode uses
standard charging algorithm and other methods during non-working hours to maximize battery
health. During working hours, express charge is used to charge the batteries faster. You can
configure the days and the time period during which the battery has to be charged. To enable
advanced battery charging, provide the day, start time, and the duration of charging (peak
usage duration).
28 Options for Dell Command | Configure 4.2