Reference Guide

For example, to set the non-critical threshold values for a cooling probe, type:
cctk Advsm --Set=Cd_1:10
For example, to set only the upper non-critical threshold value for a temperature probe, type:
cctk Advsm --Set=Temperature_1:100
If the system has a setup password, while setting the non-critical threshold values specify the setup password and set the non-
critical threshold values as:
cctk Advsm --Set=<option name>:<upper non critical threshold value> --ValSetupPwd=
<setup password>
For example, to set the non-critical threshold values for a voltage probe on a system with a setup password, type:
cctk Advsm --Set=Voltage_1:10 --ValSetupPwd= <setup password>
For example, to set the non-critical threshold values for a current probe on a system with a setup password, type:
cctk Advsm --Set=Current_1:55 --ValSetupPwd = <setup password>
For example, to set the non-critical threshold values for a cooling probe on a system with a setup password, type:
cctk Advsm --Set=Cd_1:55 --ValSetupPwd = <setup password>
For example, to set the non-critical threshold values for a temperature probe on a system with a setup password, type:
cctk Advsm --Set=Temperature_1:55 --ValSetupPwd = <setup password>
If the system has a system password and no setup password, while setting the non-critical threshold values specify the system
password and set the non-critical threshold values as:
cctk Advsm --Set=<cctk option name>:<upper non critical threshold value> --ValSysPwd=
<system password>
For example, to set the non-critical threshold values for a voltage probe on a system with a system password and no setup
password, type:
cctk Advsm --Set=Voltage_1:10 --ValSysPwd = <system password>
For example, to set the non-critical threshold values for a current probe on a system with a system password and no setup
password, type:
cctk Advsm --Set=Current_1:10 --ValSysPwd = <system password>
For example, to set the non-critical threshold values for a cooling probe on a system with a system password and no setup
password, type:
cctk Advsm --Set=Cd_1:10 --ValSysPwd = <system password>
For example, to set the non-critical threshold values for a temperature probe on a system with a system password and no setup
password, type:
cctk Advsm --Set=Temperature_1:10 --ValSysPwd = <system password>
PCI reporting
The scan of the PCI bus will use a file to resolve PCI vendor and device codes to vendor information strings. The format of the
PCI output is as follows:
PCI Bus: 2, Device: 4, Function: 0
Vendor: 8086 - Intel Corp.
140
Options for Dell Command | Configure 4.2