Reference Guide

--WirelessSwitchWlanCtrl
Table 526. --WirelessSwitchWlanCtrl
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables the effect of physical wireless switch on wireless LAN and WiGig radio.
● Enabled — If the wireless physical switch is on, turns the wireless LAN on and WiGig radio
on. If the wireless switch is off, turns the wireless LAN on and WiGig radio off.
● Disabled — The wireless physical switch does not effect the wireless LAN and WiGig
radios.
--WirelessSwitchGps
Table 527. --WirelessSwitchGps
Attribute Details Description
Valid Argument Enabled, Disabled
Enables or disables the effect of physical wireless switch on the GPS radio of the wireless
WAN card.
● Enabled — If enabled, wireless switch turns the GPS radio of the wireless WAN card on or
off.
● Disabled — If disabled, wireless switch does not have any effect on the state of the GPS
radio of the wireless WAN card.
--WwanAutoSense
Table 528. --WwanAutoSense
Attribute Details Description
Valid Argument Enabled, Disabled
When enabled, this feature disables the WWAN radio if the system is connected to a wired
network and vice-versa.
--WwanStealthMode
Table 529. --WwanStealthMode
Attribute Details Description
Valid Argument Unchanged, TurnOff
Configures the state of the WWAN (and WiGig) radio depending on the Stealth mode is
enabled or disabled.
● Unchanged — Retains the current state of the of the WWAN (and WiGig) radio.
● TurnOff — Turns off the WWAN (and WiGig) radio if the Stealth mode is enabled.
Options for Dell Command | Configure 4.2 137